- EV Chargers
- 1st January 2020
The zappi is very quickly becoming the EV community's favourite electric vehicle charger.
This eco-smart charger not only operates as a traditional EV fast charger, it can also charge your electric car using 100% FREE energy generated from your Solar PV or wind generation.
OK, yes there are other chargers out there that will automatically use my Solar generated energy. However the Zappi does more; It waits for surplus energy produced by your solar. The charger can automatically pause until there is sufficient surplus solar power generated before continuing to charge your electric car. Other chargers will use solar, but if there is no solar power it will just take electricity from the grid … costing you money!
By using the Myenergi SMART App, the zappi can be programmed to charge for FREE using your PV during the day and be set to charge at the most economical times at night if you have preferred economy rates from your energy provider.
No Solar? No Problem!! If you don’t have a solar PV system at home or at work, zappi can still operate like an ordinary EV charging station importing from the grid. You can always add your solar/wind system later.
PRO'S & CON'S
- Programmable timer function
- Dynamic load balancing for maximum installation flexibility
- Charge and event logging
- Pin-code lock function
- Tap operated display backlight
- Built-in RCD protection
- Integral cable holster
- Remote control and monitoring add-on option
- Supplied with clip-on grid current sensor
- 3x charging modes: eco, eco+ and fast
- Optimises microgeneration self-consumption
- Economy tariff sensing
- 18th edition ready
- Available in 7kW or 22kW (3-phase)
- OLEV (Home and Workplace ChargerScheme) Approved – Hub required
- 3 year warranty
Love that I can see exactly how much power has been used and where it has come from (solar or grid). Also, we have a block drive and the Zappi didn’t need an earth rod installed like most other EV chargers.
|Rated Power||7kW (1-ph) or 22kW (3-ph)|
|Rated Supply Voltage||230V AC Single Phase or 400V AC 3-phase (+/- 10%)|
|Supply Frequency||50 Hz|
|Rated Current||32A max|
|Standby Power Consumption||3W|
|Earth Leakage Protection Integral||30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)|
|Economy Tariff Sense||Input 230V AC sensing (4.0kV isolated)|
|Wireless Interface||868 MHz (proprietary protocol) for wireless sensor and remote monitoring options|
|Grid Current Sensor||100A max. primary current, 16mm max. cable diameter|
|Cable Entry||Rear, bottom or side|